Range: | 0~2~10mH2O | Output: | 4~20mA, RS485 |
---|---|---|---|
Power Supply: | 9~28VDC, 5~28VDC | Accuracy: | 0.5%FS |
Highlight: | Economical Submersible Level Transmitter,Submersible Liquid Level Transmitter,Submersible Level Transmitter |
CYW09Y economic input level transmitter is born for the level measurement of indoor water tanks, pools and so on, with high cost-effective, high reliability and other characteristics.
Measuring medium | Water (H2O) or liquid compatible with contact materials |
Liquid level range | 0~2~10mH2O (see range selection table for details) |
Medium temperature | -40~60℃ (the temperature difference between the measured medium and the external environment is ≤10℃) |
Response frequency | ≤5Hz |
Accuracy level | 0.5%FS |
Temperature compensation | -10~60℃ |
Stable performance | ±0.2% FS/year |
Liquid level overload | 200% full scale |
Temperature drift | ±0.02%FS/℃ (within temperature compensation range) |
Protection level | IP68 |
Overall weight | Probe ≈ 180g Cable per meter ≈ 60g |
Connection time | 20ms |
Resolution | Analog output 0.025%FS, digital output 0.05%FS |
Output power supply | |
4~20mA | 9~28VDC |
RS485 | 5~28VDC |
Maximum Power | |
4~20mA | ≤0.02Us(W) |
RS485 | ≤0.015Us(W) |
Load characteristics | |
Current Type | Load ≤{(Us-7.5)÷0.02}Ω (Us=supply voltage) |
Environmental conditions | |
Ambient temperature | -40~85℃ |
Ambient humidity | 0%~95%RH (no condensation, no condensation) |
Overall material | |
Diaphragm | 316L stainless steel (contacting the measured medium) |
shell | 304 stainless steel and ABS engineering plastics (in contact with the measured medium) |
Seals | Nitrile rubber (contacting the measured medium) |
Cables | XL11 PVC φ7.2 air-conducting shielded cable (contacting the measured medium) |
Mechanical stability | |
Vibration resistance | 10g (20…2000Hz) in accordance with IEC60068-2-6 standard |
Impact resistance | 500g/ms Comply with IEC60068-2-27 standard |
Electrical protection | |
Short circuit protection | permanent |
Reverse polarity protection | No damage, but not working |
Insulation resistance | ≥100MΩ,500VDC |
Dielectric strength | 500VAC |
Output Limitation | |
4~20mA | 4mA~20mA |
RS485 | 0~2000 |